产品展示

产品展示

联系大家

正版免费资料大全

联系人:汪先生

固话:0591-87899596

电话:19906933063

服务热线:400-101-7811

网址:www.patrickjcameron.com

地址:福州市乌龙江南大道55号龙旺国际1号楼1601-1603

莆田高渗透环氧封固底漆

您的当前位置: 首 页 >> 莆田建筑涂料

莆田高渗透环氧封固底漆

  • 详细先容

   

高渗透环氧封固底漆

High-permeability epoxy cementing primer

 

产品说明:

本品采用环氧树脂,具有耐磨损、耐冲击、耐化学品等性能而为广大使用者所认同,而环氧作为封闭底漆使用有其独特的优点。环氧基因有较低的表面张力和优良的粘附力,并且环氧的成膜机理是环氧基团开环发生化学反应,这种成膜远比乳胶漆成膜要密实的多。且环氧还能与碱反应形成硅酸盐,有效的阻止盐和碱的迁移。环氧涂膜的耐化学品性能为其在强碱条件下的稳定性提供了保证。另外环氧树脂中含有-OH,也可以在底材中形成氢键从而增加封闭和附着力。

Product description:

This product adopts the epoxy resin, and has the performance, such as wear resistance, impact resistance and chemical resistance, therefore, it is approved by many users; and the epoxy has its unique advantage as the seal primer. The epoxy gene has low surface tension and good adhesive force, and the epoxy film formation mechanism is that the open loop of epoxy group is subjected to the chemical reaction, and such film formation is far denser than film formation of latex paint. And the epoxy can also react with alkali to form silicate, so as to effectively prevent the migration of salt and alkali. The guarantee is provided for the stability of chemical resistance of epoxy paint film when the strong alkali is provided. In addition, -OH is included in the epoxy resin, and the hydrogen bond is formed in the substrate to add the closure and adhesive force.

 

产品特性:

1、承载性,封闭性优越。

2、抗碱、抗盐析性优越。

3、高渗透力,抗潮湿性能好。

4、增强弹性漆与基层粘结强度。

Product feature:

1. It has good bearing capacity and closure.

2. It has alkali resistance and good salting-out resistance.

3. It has high seepage force and good moisture resistance.

4. It reinforces the elastic paint and bonding strength of base.

 

适用范围:

1、强化已粉化的旧基层和脆弱的腻子层,起到加固和封底的双重功能。

2、配套各种高粘性的附载层涂料(如:弹性涂料、厚质中层料)的抗碱封闭底能。

Scope of application:

1. It strengthens the old powdered base and weak putting layer, and plays the dual function of reinforcing and sealing.

2. It is matched with alkali-resistant seal primer of the various high-viscosity attached coating (such as: elastic coating and thick intermediate coating).

 

注意事项:

1.基面强度达5kgf/cm2以上,含水率10%以下,PH10以下,基面养护20日以上,基面平整度2mm以下。

2.施工天候:气温5℃以上,空气湿度85%以下。

3.干燥时间:全干24HR,指触3HR

Precautions: 

1. The strength of base reaches 5kgf/cm2 above, its moisture content is below 10%, its PH value is 10 below, it is cured for more than 20 days, and its flatness is below 2mm.

2. Construction weather: The air temperature is 5℃ above, and the air humidity is below 85%. 

3. Drying time: 24HR for being fully dry and 3HRfor dry tack-free.

 

Recommended construction process and dosage: 

The dosage for spraying or roll painting is about 0.1-0.2kg/m2.

推荐施工工艺与用量:

喷涂或滚涂每平方用量约0.1-0.2kg.

Product feature: 

Water soluble, bright, transparent and single-component.

产品特征:

水溶性、有光、透明、单组份。


福州底漆

本文网址:/product/589.html

关键词:福州底漆,福州底漆价格,福州底漆厂家

最近浏览:

XML 地图 | Sitemap 地图